Arri Cameras

Arri cameras from the SXT and up are supported by CineLink.

Physical

Arri cameras connect via a wired Ethernet link. This requires an adapter cable.

You can also use the Ugland on-camera router to convert the ethernet connection info a WiFi connection for wireless operation

2_IMG_4796

CAP Setup

In the menu, navigate to System->Camera Access Protocol (CAP) and check CAP Server Enabled.

To get your IP Address, go to System->Network/Wifi

Earlier models (SXT/LF) only allow one connection to the camera at a time. Newer models allow up to 4. Each licensed CineLink computer is a separate connection.